The maintenance vehicle chassis often been regarded as dispensable, far from the engine and the body then to the people, in fact, vehicle chassis are maintained properly, directly related to vehicle safety, handling, comfort and economy, and other key Performance, can not be taken lightly at all.

     Timely examination of the important assembly oil situation

     Here, including transmission, brake systems, such as power steering systems, on the one hand should strictly follow the directions of the time, regular maintenance services to the special station to supplement or replace, on the other hand have to check their own observations, to be generally in check passing cars when refueling Click,

     Look at all the oil in the tank, under the scale line between the two, off the assembly line will be lower than if timely added that the rapid decline of oil if that system is leaking, the need to immediately check leakage site, Timely repair.

     Pay attention to brakes and clutch-wear

     Brakes and clutch two-friction films are consumables, use after a period of time will wear and tear, the loss of the original function. If not promptly replaced easily lead to accidents. General vehicles have the appropriate warning indicator light, will promptly issued a warning signal to remind vehicle owners to replace.

     Most cars now use the method to use adhesive friction-connected to the steel back to the friction has been grinding to the last film, metals and metal will be sent direct contact with sound, then only the replacement of friction films have been too late. So are fitted with an electronic signal sensors, some friction in the remaining 1.5 millimeter film, the brakes on the dashboard indicator light will turn on, which reminded the main vehicle to replace the friction film.

     4 positioning is very important

     Rough, the car's four-wheel seems to be correct and are upright on the ground, not a matter of fact, if the instruments to measure, you will find them in the X, Y, Z plane three more deflection of a point, but Numerical small, generally only 0.5 to 2 degrees, simply do not tell the naked eye. Do not underestimate these three small Pianzhuanjiaoduo, it decided to shift the car's performance. If the crash, or use long time because of wear and changed, control will be greatly reduced. Therefore, if the manipulation of the steering wheel feel strange, it should be the aftermarket plant to the formal or professional orientation of the four inspection stations to check and to be adjusted accordingly. Inexpensive, but to ensure a safe driving.

     Chassis tire maintenance is the key

     First of all to pay attention to tire pressure, high inflation pressure, tire easily burst and the pressure is too low, car resistance increased, the corresponding increase in fuel consumption. Qin also check the tire tread pattern has sharp nails, stones and broken glass so as to avoid stabbed tires. Surface of the tire tread wear to a certain extent, on the need for timely replacement tires. When the pattern is usually to wear only 1.5 to 2 millimeters, will find that a tire on a specific tags, different brands of tyre marks not the same, but on all the brochures that. At this time it is necessary to replace the tire.